Operation Manual
PR-3
Model PR-3
- 2 -
applications and limitations, as well as
specific potential hazards peculiar to it.
2.
Keep work area clean and well lit.
Cluttered or dark work areas invite
accidents.
3.
Keep Children away.
All children
should be kept away from the work area.
Never let a child handle a tool without
strict adult supervision.
4.
Do not operate this tool if under the
influence of alcohol or drugs.
Read
warning labels on prescriptions to
determine if your judgment or reflexes are
impaired while taking drugs. If there is
any doubt, do not attempt to operate.
5.
Use safety equipment.
Eye protection
should be worn always when operating
this machine. Use ANSI approved safety
glasses. Everyday eyeglasses only have
impact resistant lenses. They are NOT
safety glasses. Dust mask, non-skid
safety shoes, hard hat, or hearing
protection should be used in appropriate
conditions.
6.
Wear proper apparel.
Loose clothing,
gloves, neckties, rings, bracelets, or other
jewelry may present a potential hazard
when operating this machine. Please
keep all apparel clear of the machine.
7.
Don’t overreach.
Keep proper footing
and balance always when operating this
product.
8.
Check for damage.
Check your tool
regularly. If part of the tool is damaged it
should be carefully inspected to make
sure that it can perform its’ intended
function correctly. If in doubt, the part
should be repaired. Refer all servicing to
a qualified technician. Consult your
dealer for advice.
9.
Keep your hands away from the die
when you are working on it.
10.
Avoid moving parts during
operation.
Deep fingers and hands away
from moving parts.
11.
Stay alert.
Watch what you are doing.
Use common sense. Do not operate any
tool when you are tired.
12.
Replacement parts and accessories.
When servicing, use only identical
replacement parts. Only use accessories
intended for use with this tool.
13.
Store idle equipment.
When not in
use, the tool should be stored in a dry
location to inhibit rust. Store in an area
out of reach of children.
14.
Don’t force the machine or tool.
It
will do the job better and more safely at
the rate for which it was intended.
15.
Use the right tool.
Don’t force a