
Full Digital Mechanical Sector Scanning Ultrasonic Diagnostic Instruments (Vet) User’s Manual V2.14
- 21 -
4. Clean the probe cable and its connector
(1) Clean the probe cable and its connector with soft, dry cloth.
(2) In case of die-hard blots, clean with soft cloth dipped in moderate detergent and then air-dry it.
5. Clean the LED screen
Use a soft cloth dipped in glass cleaner to clean the LED screen, and then air-dried.
6. Clean the control panel, shell
Clean the instrument surface with soft, dry cloth or with soft cloth dipped in moderate water
cleaning media to remove the blots, and then dry the instrument with soft, dry cloth or with air.
7. Clean the video recorder
(1) Use the soft dry cloth to wipe the video recorder.
(2) If it is difficult to wipe away the blemish, clean with soft cloth dipped in moderate detergent and
then air-dry it.
9.1.2 Use and maintenance for the rechargeable battery
1. Only use charger and battery provided by KaiXin Company.
2. The output port of adapter plugs into the input port of charger to charge; the minimum charging time
is 6 hours and up to 7 hours. Over-charging or discharging will shorten the battery life; the full
charged battery can be used for 5-6 hours.
3. Battery is consumable; the battery cycle-life is based on the times of charge and discharge as unit.
When the use time reduced significantly compared with normal conditions, the battery should be
promptly replaced.
4. The excess high or low temperature will affect the charging and discharging performance, and short
the battery life and capacity.
Attention:
Battery is consumable; the battery cycle-life is based on the times of charge
and discharge as unit. When the use time reduced significantly compared with normal
conditions, the battery should be promptly replaced.
Attention:
Do not clean the screen with hydrocarbon detergent for example alcohol etc
or OA equipment cleaning media.
Attention:
Battery charger shall meet the requirements of the IEC60601-1 standard.
Attention:
A power indicator will appear “X” and glitter continually when the electric
quantity is too low. Connect the main unit to external power supply and recharge the
battery, or turn off the machine to recharge.
Attention:
If long-term use external power or do not intend to use the equipment within
such a period of time, please remove the battery, to avoid over-charging or discharging the
battery which will curtail battery life, or to reduce other risk.
Attention:
Prohibit using sharp objects to touch the LED screen, and prohibit pressing
or squeezing against the LED screen.