kaivac
cleaning
systems
TM
kaivac
cleaning
systems
TM
P a g e ǀ
1 4
2.0 Operation
If the Vacuum Motor shuts off before the job is complete, the Vacuum Tank may be full and need to be
emptied. Lift the Vacuum Motor to check liquid level inside the Vacuum Tank. If unit is full or your job is
complete, follow the instructions below to empty Tank into appropriate sink/drain.
Once cap is removed, lower Dump Hose into appro-
priate sink/drain. To prevent an accidental spill or
overflow from the Dump Hose, be careful to keep
hose end upright until it is over sink/drain.
To begin the dumping process, you must
first press down on the Cap and turn
counter-clockwise
PRESS
DOWN
TURN
2.4 e
Mptying
v
ACUUM
t
Ank
Before starting each new cleaning process, remove Filter Bag, dump any debris out, spray clean, and then
replace back into the Filter Bag Frame.
FIL
TER
BA
G
HOLDER
T:
0121 351 4444
E:
W:
www. rawlins.co.uk
