Kaivac COOLER CLEANER, Руководство оператора и каталог запасных частей

Страница: 24 / 32

kaivac
cleaning
systems
TM
P a g e ǀ 2 4
1-800-287-1136
Customer/Technical Support
4.2 t
RoUbLeshooting
4.0 Troubleshooting and Upkeep
CAUTION :
Always unplug machine before lifting electric cover assembly.
AREA PROBLEM POSSIBLE CAUSE SOLUTION
High Pressure
System
No water from pump
or low pressure
Out of water Fill water tank
Gun nozzle plugged Remove orifice with Allen wrench
and clean
Air in pump (vapor lock) Use power prime technique
Gun orifice missing Replace orifice
Water tank filter plugged Clean tank and filter
In-line bowl filter plugged Remove filter cover and clean
Bowl filter lid loose Gently tighten bowl cover
Pressure hose damaged Repair or replace
Quick disconnect leaking Tighten or replace
Injector plugged Remove safety cap from chemical
and blow small amounts of
compressed air into line
Pulse hose damaged Repair or replace
Regulator failed Replace
Hose kinked Unkink and check for damage
Seals in pump need replaced Remove and replace seals
Bad fan pattern or
pinpoint pattern on
gun
Debris in nozzle Remove orifice with Allen wrench
and clean
Orifice damaged Remove and replace
Dump System
Dump hose will not empty
tank
Dump hose cap not
removed Remove cap
Clog in bottom of tank Tip dump contents, remove
debris
Dump hose leaks
Hose cut If leak is less than 4” from
tank side, cut and reattach,
or replace
Clamp loose Tighten hose clamp
Dump cap missing Replace cap
Wheels and Casters Wheels will not roll;
rubbing
Flat tires Inflate tires to 30 p.s.i.
Debris wrapped around
axle
Check for debris on axle
Bearings tight Grease bearings
Wheels too loose on axle Remove wheel, add
washers to take up slack
Bearings falling out Replace bearing assembly
Squeegee Head
Floor streaks Worn blades or wheels Replace wheels and/or blades
Squeegee head does not
easily rotate when
installed on wand
Brass ring on wand not in
groove Loosen coupling nut and
re-position head on groove
Coupling nut too tight Loosen 1/2 turn
Head will not stay on
wand
Coupling nut cracked Replace
Brass ring worn Replace
Premature blade wear Squeegee wheels worn Check wheels for wear/
replace
Sucks to the floor too
tightly
Squeegee wheels worn Check wheels for wear/
replace