Kaivac COOLER CLEANER, Руководство оператора и каталог запасных частей

Страница: 10 / 32

kaivac
cleaning
systems
TM
P a g e ǀ 1 0
1-800-287-1136
Customer/Technical Support
1.3 s
Afety
p
ReCAUtions
: b
AtteRy
o
peRAted
(C
ontinUed
)
• CHECK FLOAT on Vacuum Motor and clean before each use. Clogged screen may lead to loss of suction.
• DO NOT allow to be used as a toy. Close attention is necessary when used by or near children.
• Use only as described in this manual. Use only manufacturer’s recommended attachments.
• DO NOT put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair and anything that
may reduce air flow.
• Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
• Use extra care when cleaning on stairs.
• DO NOT use without Vacuum Motor Float Cage in place.
SPRAY SYSTEM WARNINGS (ONLY):
• Do not spray liquid from the Kaivac onto electrical outlets or any electrical devices.
• Risk of injection or injury to persons - do not direct discharge stream at persons.
• INJECTION HAZARD: Equipment can cause serious injury if the spray permeates the skin. do not point the gun at
anyone or any part of the body. in case of permeation, seek medical aid immediately.
• This system is capable of producing 500 PSI (3447 kPa). To avoid rupture and injury, do not operate this pump with
components rated less than 500 PSI (3447 kPa) working pressure (including but not limited to spray guns, hose, and
hose connections); and before servicing, cleaning or removal of any part, shut off power and relieve pressure.
• High pressure cleaners shall not be used by children, persons with reduced physical, sensory or mental capabilities
or lack of experience and knowledge or untrained personnel. Children shall not play with the appliance. Cleaning and
user maintenance shall not be made by children without supervision.
This product comes with a grounded attachable extension cord. If damaged, replace with equivalent cord rated 120V, 15 amps, 3-wire, 14 GA. This
cord must be attached and mechanically secured using the provided cord connector to use the equipment.
QUICK RELEASE INSTRUCTIONS
1. To disconnect the motor from the Battery, pull the button on the electrical connector toward you and turn the electrical connector count -
er-clockwise 90 degrees to disengage the motor electrical cord from the Battery Pack.
2. Then to remove the Battery from the unit, while standing at the rear of the nit, grab the Battery on either side and pull it away from the
unit.
3. To reconnect the Battery Pack to the electrical motor, insert the motor electrical connector into the Battery Pack outlet aligning the key
features of the electrical connector into the outlet key-way. Press the connector into the outlet and turn clockwise 90 degrees until the
connector locks into place.
GROUNDING INSTRUCTIONS
The charger must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce
the risk of electric shock. This appliance is equipped with a cord having equipment grounding conductor and grounding plug. The plug must be
inserted into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
WARNING — Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician
or service person if you are in doubt as to whether the outlet is properly grounded. Do not modify the plug provided with the appliance – if it will
not fit the outlet; have a proper outlet installed by a qualified electrician.
This appliance is for use on a nominal circuit and has a grounding attachment plug. Make sure that the appliance is connected to an outlet having
the same configuration as the plug. No adapter should be used with this appliance.
Personal Protective Equipment (PPE): It is recommended to wear proper personal protective equipment as required by the Chemical product label
instructions used in conjunction with the appliance.
WARNING — To Reduce the Risk of Electric Shock — Do not expose to rain. Store indoors.
1.0 Getting Started
Battery Specifications
Weight With Box, 11 lbs. (4,9 kg)
Body Material Injection Mold Polypropylene
Dimensions (H x W x D) 18 x 7 x 5 in. (45,7 x 17,8 x 12,7 cm)
Voltage 36V DC
Battery Capacity 15 A-hr
Battery Current 15 A DC
Battery Type Lithium-Ion
Approx. Run Time BOL (Beginning of Life) 60 minutes
Approx. Run Time EOL (End of Life) 35 minutes (discontinue use and take to recycling center)
Battery Box Receptacle IP65 / IP67 (not required for UL)
Run Time Hour Meter Acts as “odometer for battery” and runs only when motor switch is ON
Approx. Charge Cycles 400 @ 100% discharge / 500 @ 80% discharge
Cut off Voltage (fully discharged) 30V
Charger Specifications
Approx. Charge Time 5.5 hours
Charger Amps 4 Amps
Charge Voltage 42V DC
Charger Voltage 110-240VAC / 36VDC (240VAC version only needs correct plug for wall outlet)
Charging Robustness No special instructions
Battery Charge Memory None
Battery Charge Gauge Yes, LED Indicator
Approx. Charge Cycles 400 @ 100% discharge / 500 @ 80% discharge
Storage/Inventory:
Storage & Operation Ambient Temp 32
0
F (0
0
C) to 80
0
F(27
0
C)
Storage & Shipping Charge 40-60% Charge (35-38VDC)