background image

kaivac

cleaning

systems

TM

P a g e   ǀ  

1 1

kaivac

cleaning

systems

TM

www.kaivac.com

©2020 Kaivac, Inc. All Rights Reserved

1.6  b

AtteRy

 i

nfoRMAtion

1.0  Getting Started

Keep Batteries at Room Temperature: 

That means storing between 32 and 80 degrees F (00C to 270C). The worst thing that can happen to a lithi-

um-ion Battery is to have it exposed to elevated temperatures. 

Batteries Lose Capacity Over Time: 

Batteries naturally deteriorate over time whether being used or not. Batteries deteriorate at a rate of 10% run 

time per year. 

Fully Discharge vs. Partial Discharge and the Effect on Battery Cycles: 

Unlike lead acid batteries typically used in auto scrubber, the Kaivac Battery 

is not damaged by fully discharging. The BMS (Battery Management System) has a cutoff voltage of 30V which protects the Battery from experi-

encing full discharge. Running the Battery to full discharge will reduce the amount of charge cycles. The expected hours of use are approximately 

600 hours. For example, if running to full discharge, you would expect 400 cycles. If you run to 80% discharge, then you would expect to get more 

cycles (500 cycles).

Extended Storage: 

It is recommended to discharge to 40% capacity (35V) and store in a cool location (between 320F to 800F or 00C to 270C). 

Hour 

Battery Gauge: 

The Kaivac Batteries come with a built-in Battery Gauge or “Fuel Gauge” which shows the approximate run time remaining.

Disposal: 

Properly dispose of Battery at a local recycling location. 

Battery Specifications

Weight

With Box, 11 lbs. (4,9 kg)

Body Material

Injection Mold Polypropylene

Dimensions (H x W x D)

18 x 7 x 5 in. (45,7 x 17,8 x 12,7 cm)

Voltage

36V DC

Battery Capacity

15 A-hr

Battery Current

15 A DC

Battery Type

Lithium-Ion

Approx. Run Time BOL (Beginning of Life)

60 minutes

Approx. Run Time EOL (End of Life)

35 minutes (discontinue use and take to recycling center)

Battery Box Receptacle

IP65 / IP67 (not required for UL)

Run Time Hour Meter

Acts as “odometer for battery” and runs only when motor switch is ON

Approx. Charge Cycles

400 @ 100% discharge / 500 @ 80% discharge

Cut off Voltage (fully discharged)

30V

Charger Specifications

Approx. Charge Time

5.5 hours

Charger Amps

4 Amps

Charge Voltage

42V DC

Charger Voltage

110-240VAC / 36VDC (240VAC version only needs correct plug for wall outlet)

Charging Robustness

No special instructions

Battery Charge Memory

None

Battery Charge Gauge

Yes, LED Indicator

Approx. Charge Cycles

400 @ 100% discharge / 500 @ 80% discharge

Storage/Inventory:

Storage & Operation Ambient Temp

32

0

F (0

0

C) to 80

0

F(27

0

C)

Storage & Shipping Charge

40-60% Charge (35-38VDC)

Содержание Autovac

























Отзывы: