7
Warning: Always test gas line for leaks at connector with soap water finishing all
connections.
How to disconnect a gas bottle
a)
Except for twin-cylinder installations with a changeover valve, turn off the gas tap if
fitted to the appliance. Wait until the burner and pilot light have gone out. For
installations with a changeover valve, it is only necessary to switch off the empty
cylinder.
b)
Replace the orange safety cap onto the empty cylinder.
5. Warning and safety points
Please read the following points before using your gas grill:
a)
Read the instructions before using the appliance. If instructions are not followed it
may cause problems in use.
b)
This gas grill accessible parts maybe very hot when being used. Keep young children
away. Use protective when handling particularly hot components.
c)
In the event of a gas leak, Turn off the gas supply at the gas bottle, extinguish any open
flames, open lid and if leak continues, check for damages, poor connections etc.
Contact your local gas dealer immediately if the problem can
’
t be solved.
d)
Do not move Gas grill during use.
e)
Do not use or store any liquids
，
vapors or other materials in the vicinity when
operating the gas grill.
f)
This gas grill only to be used outdoors.
g)
Do not use a naked flame to check for gas leaks.
h)
Do not operate gas grill if there is a gas leak. Turn off the gas supply.
i)
Do not attempt to disconnect any gas fitting part if your gas grill is being used, on the
gas grill or the gas regulator / bottle.
j)
Care is advised when operating your gas grill, you should never leave unattended when
in use. Turn off the gas supply at the gas container after use.
k)
The gas grill should be cleaned after use. Don
’
t obstruct the fire opening of the
container compartment. If the fire opening is obstructed, please use
Φ
1.6mm round
stick to dredge.
Take care not to enlarge burner ports or orifice/nozzle openings when cleaning the
burner or valves.
