Tigertop™ – Installation Instructions
Strap
Detail of Rear
Curtain
Rear
Window
Side View
Curtain Up
Fabric
Rear Curtain
To roll up the Rear Curtain, start at the bottom and roll it to the inside. Avoid
wrinkles in the fabric and window. Secure it in place with the curtain straps
inside of the top.
Adjusting the Top
Folding the Top Down
Removal of Soft Top for Open Air Driving
Curtain Down
When operating the vehicle with the rear window
open, one or more door windows should be open
for proper ventilation.
When operating the vehicle with the fabric top removed, it is very important that
the supporting hardware system be disconnected from the windshield bracket
and folded flat to the rear of the vehicle. The vertical and horizontal rods should
be snapped into the plastic clips located on the inside of both bow mount brack-
ets. Wrap the elastic straps around the bows and snap them to the body studs.
Never operate the vehicle with the fabric removed and the hardware in the fully
erected position.
Unsnap the Rear and Side Curtains and open the Rear Curtain zippers. Fold
the Side Curtains up onto the top and release the hook and loop fasteners on
the flaps, above the doors. Unsnap the top from the rear bow.
Release the locking tabs on the Bow Releases from the holes in the bow and
slide the rear bow down to the Bow Mounts. Release the Horizontal Rod from
the Front Rod Retainers. Remove the Vertical Rod from the Vertical Retainer
Mount and lay the bow assembly down on the rear of the vehicle.
Unfasten the top from the windshield and lay it down on the body. Make sure
that the rear corners of the top are tucked under the rear bow. Fold the top in
half from front to back and continue folding until the top is about 1 foot wide at
the rear of the vehicle. Secure the Vertical Retainers and the Horizontal Rods by
clipping them into the Rod Retaiers on the Bow Mounts. Secure the rear of the
bow assemblies by snapping the Bow Tie Down Straps to a Corner Body Stud.
