Kaiser Baas TRAIL, Руководство пользователя

Страница: 10 / 19

CALIBRATION CALIBRATION 15 - ENG 16 - ENG
Gyroscopic Calibration
Press and hold the Gyro calibration button for
4 seconds. The LED lights under the Drone will
start flashing quickly. Wait until the LED lights
are pulsing.
GPS
Make sure the Drone receives GPS signal before
you take it to fly. If the signal is weak, the LED
light will start flashing. LED lights becomes solid
when the GPS signal is strong.
Trail Drone will enter default into GPS mode once
it received the GPS signal. If the Drone does not
receive the signal, check the GPS Trail on the
remote controller and ensure that it is on.
Compass Calibration
Press and hold the Compass calibration button
for 4 seconds. The LED lights under the Drone
will start flashing quickly. Wait until the LED lights
are pulsing.
Now, hold the Drone straight and horizontally
rotate 360° in clockwise direction for 3 times
continuously.
Then hold the Drone vertically with the camera
facing up and rotate 360° in clockwise direction
for 3 times. Place it on a leveled surface again,
LED lights will flash slowly. Calibration is now
competed. LED lights will become solid once the
Drone received sufficient GPS signal.
When you press, long beep indicates that the
GPS is on and short beep indicates that the
GPS is off.