Kaisai KPPH-09HRG29, Руководство пользователя

Страница: 16 / 74

Window Installation Kit
Or
Step Two: Install the Exhaust hose assembly to
the unit
Installation
Instructions
Type window installation Type wall installation
Type window installation Type wall installation
Press the exhaust hose(or extended exhaust hose)
into the window slider adaptor(or wall exhaust
adaptor) and unit adaptor, clamp automatically by
elastic buckles of the adaptors.
Step One: Preparing the Exhaust Hose assembly
Exhaust hose
Extended Exhaust
hose
Exhaust hose assembly
Exhaust hose
Extended Exhaust
hose
Exhaust hose assembly
Unit adaptor Window slider
adaptor
Exhaust hose
Exhaust hose
assembly
Exhaust hose
assembly
Unit adaptor Wall exhaust
adaptor A
Exhaust hose
Push the Exhaust hose into the airoutlet opening of
the unit along the arrow direction.
Other Regions
Name of Accessories
Qty. Shape
Name of Accessories
Qty. Shape
1 pc(*) Window Slider A Bolt
1 pc 1 set(*) Unit Adaptor Security Bracket and 2 Screws
1 pc 1 pc Exhaust Hose Drain Hose
1 pc(*) 1 pc Window Slider Adaptor Power Cord Buckle
O
N /O
F F
TE
M P
SH
O R T
CU
T
T
IM E R
ON T
IM E R
O
FF
M O DE FA N
SL
EEP
S W IN
G
LE D
1 set(*) 1 pc(*) Window Slider B
Remote Controller and Battery
(only for remote control models)
1 pc(*)
Wall Exhaust Adaptor A
(only for wall installation models)
2 pc(*) Foam Seal A (Adhesive)
1 pc(*)
Wall Exhaust Adaptor B(with cap)
(only for wall installation models)
2 pc(*) Foam Seal B (Adhesive)
4 set(*)
Screw and anchor
(only for wall installation models)
1 pc(*) Foam Seal C (Non-adhesive)
1 pc(*)
Drain Hose Adaptor
(only for heat pump mode)
1 pc(*)
1 pc(*)
1 pc(*)
Exhuast Hose Adaptor
Extended Exhuast Hose
Installation
Instructions
Step Three: Preparing the Adjustable Window
Slider
1. Depending on the size of your window, adjust
the size of the window slider.
2. If the length of the window requires two or three
window sliders, use the bolt(s) to fasten the
window sliders once they are adjusted to the
proper length.
Window slider A Window slider B
Bolt
Window slider A Window slider B
Window slider C
Bolts
or
Installation
NOTE: Once the Exhaust Hose assembly and Adjustable Window Slider are prepared, choose from one of
the following two installation methods.
Or
Foam seal B
(Adhesive type-shorter)
Foam seal A
(Adhesive type)
Type 1: Hung Window or Sliding Window Installation(For some models)
1. Cut the adhesive foam seal A and B strips to the proper lengths, and attach them to the window sash
and frame as shown.
Foam seal B
(Adhesive type-shorter)
Foam seal A
(Adhesive type)
Or
Or
Window
slider A
Window slider
B(if required)
Foam seal C
(Non-adhesive type)
3. Cut the non-adhesive foam seal C strip to match the width(or height) of the window. Insert the seal
between the glass and the window frame to prevent air and insects from getting into the room.
2. Insert the window slider assembly into the window opening.
Window slider A
Window slider B
(if required)
Foam seal C
(Non-adhesive type)
EN
57