Kaindl SSG 600-M-LF, Инструкция по эксплуатации

Страница: 25 / 34

25
The operation of the control unit is real simple and made for the workshop.
32.
ADJUSTMENTS AT THE
SSG 600-A-DC
Adjustment value for transport
(way of transport)
to be sharpened teeth (display)
Adjustment value for way of grinding
Increase value for 1
Save changes
call edit mod
e
decrease value for 1
For changing the values of transport and grinding please proceed as follows:
1.
Call edit mode by pressing the edit button. (The value for transport is flashing)
2. Increase or decrease value with buttons "+1" or "-1". In case you do not want to
change values go to item 3.
3. Confirm adjustments with "OK" (adjustment value for grinding way flashes)
4. The adjustments for grinding way is same as described in item 2.
5. Confirm by pressing "OK" button
6. With button ">" (11 shift page display) for saw blade setup
The adjustment of these values are to be made same as for transport- and grinding way.
1.
Call the edit mode by pressing the "Edit" button. (Adjustment value for number of
teeth to be sharpened)
2. Increase or decrease values with buttons "+1" or "-1". In case you do not want to
change values go to item 3.
3. Confirm adjustments with "OK" (adjustment value for alternating teeth flashes)
4. The adjustment for grinding way is same as described in item 2.
5. Confirm adjustment with "OK"
.
6. With button ">" (11 shift page display) back to the saw blade setup
Number of teeth to be sharpened (set value)
Number of teeth to be transported (set value for
alternating teeth)
Number of grinding repetitions (set value)