7
Center the circular knife with the appropriate spacer ring on the fixation flange. Now fix
the circular knife with the supplied pressure disk and the fixation nut on the fixation flange
(see Picture).
When fixing or loosing the fixation nut, keep pressed down the shaft locking mechanism.
Turn the shaft by using the supplied spanner wrench till the shaft locking snaps in.
!!! Pay attention when fixing or loosing, risk of injury !!!
4.
OPERATION
4.1
CLAMPING
OF
THE
CIRCULAR
KNIFE
Pressure disk
Pressure disk
Shaft locking
mechanism
Shaft
Lynette
Fixation flange
Then place the lynette on the backside of the circular knife. Align the lynette in the way
that it's turning softly on the cutting edge of the knife (e. g. align circular knife 10°, lynette
to 15°). Depending on the type of your circular knife, you can change the angle of the
lynette head correspondingly. The lynette acts as support for the circular knife and gives
the knife a burr-free shape.
Place on the
backside of the
cutting edge
Adjustment of
angle value
