20
19.
MAINTENANCE
The circular knife sharpening machine RMS-NC should be cleaned occasionally from
grinding dust with a soft brush. Persisant dirt, please clean with a usual in trade machine
cleaner. Occasionally check the electric cable and plug for damage.
20.
CLEANING
AND
GREASING
For granting full functionality of the circular knife sharpening machine RMS-NC, the
circular knife sharpening machine should be cleaned periodically from grinding dust with
a soft brush. Also regularly clean the cooling ribs and the ventilation (fan propeller/
ventilation grille) of the grinding motor. Persisant dirt, please clean with a usual in trade
machine cleaner Occasionally check the electric cable and plug for damage. For
preventing corrosion, provide blank and blue steel parts with a slight film of oil.
! Important ! The protective cover plates of the machine protect the guidances,
spindles and switches below from dirt and cooling liquid. So when cleaning the
machine with the cooling liquid gun, do not undermine these protective cover
plates.
21.
REPAIRS
Repairs on the machine can only be carried out in our company Kaindl or by persons
authorized by us. The change of wear parts, as the diamond wheel, can be replaced by
user.
The exchange of electronic parts may only be done by an electro engineer!
22.
DISPOSAL
OF
THE
MACHINE
INSIDE
EU
When sending back the machine to us (transport charges prepaid), die company Kaindl-
Schleiftechnik Reiling GmbH grants for the competent disposal as per the currently in
force guidelines of the Europeen waste electrical equipment regulations.