Kaindl BSG 60, Инструкция по эксплуатации

Страница: 19 / 22

19
Change of the cam
In case you have to change the cam of your SVR loosen the threated pin with an allen key
SW 3,0 (see picture)
Place the SVR 31 with the handwheel on a flat surface.
By hand, press down the body (against spring tension).
With your other hand, draw the cam
beside the roller bearing upside out of the body.
The inset of the cam is done reversely.
Please pay attention tha threated pin is mounted in the provided notch.
Maintenance and greasing
The regular cleaning and greasing of the machine is important for the life-time of the
machine.
Daily: Remove grinding dust from prism and prism support.
Do not apply air-pressure!
Weekly : Clean the machine completely and spray the blank parts with oil.
Close your grease box. Grease from open boxes cannot be used.
For greasing the slides, the machine has lubrification nippels. For cleaning the nipples, use
a non fray wiper.
The motor bearings have a life-time lubrification. In case of heavy duty conditions, as high
humidity, extreme dust, etc, we propose to change the bearings after five years.
Draw the
cam beside
the roll
bearing
upside out