5
RECOMMENDATIONS
Listed below are the most important recommendations for the use of the
16x8 Selector:
1- To avoid any equipment failures its vital
to connect
to the 16x8 Selector
the
following
things
: the instrument, the amplifier inputs, the amplifier outputs
and the speakers. The initial connection should be with the amplifiers turned
off or Stand by.
2- Once
everything
has
been
connected
with
cables with soldered
connectors
you can use the 16x8
MIDI Selector with all the
amplifiers
permanently
switched
on
. Its not neccesary to use the Stand By mode each
time that you want to change the amplifier.
3- In the case where
some speaker outputs are not being used
, be carefull
not to select them
to avoid the amplifiers functioning without being charged.
4- This Selector contains an
input mute
system and phantom charge for the
amplifiers which have not been selected.
