Kagan MegaTimer, Инструкция по эксплуатации

Страница: 6 / 20

MegaTimer™ Instruction Manual
Kagan Publishing • (800) 933-2667 • www.KaganOnline.com
Powering Up
Batteries
Battery operation requires 6 AA batteries.
You may use 6 AA batteries or a power adapter to power up your
MegaTimer. Please refer to the Batteries or Power Adapter section
for proper use.
6 AA
–
+
To Insert Batteries
1. Press up on the tab of the battery door to remove the battery door.
2. Insert 6 AA batteries, 3 per row. Be careful to match the + and – ends of
the batteries to the + and – indicated on the back of the MegaTimer (see
diagram below).
3. Replace the battery door.
Battery Installation Diagram
• Batteries should be installed and removed by an adult only.
• Do not dispose of batteries in fire. Batteries may explode or leak.
• Install batteries with the correct polarity (+ and –).
• Do not mix batteries (old and new; alkaline, standard, rechargeable; type).
• Do not attempt to recharge nonrechargeable batteries.
• To avoid leakage, remove batteries if not using for a long period.
• Replace the batteries at first sign of incorrect operation.
Important Battery Information
Battery Saving Tips
• Turn off the display when not in use.
• Backlight is not recommended for battery use;
use a power adapter when using the backlight.
• Use a power adapter instead of batteries
unless mobile use is required.