Kagan MegaTimer, Инструкция по эксплуатации

Страница: 13 / 20

MegaTimer™ Instruction Manual
Kagan Publishing • (800) 933-2667 • www.KaganOnline.com
To Stop and Resume the Count Down Timer
• Press the Stop button to stop the countdown.
• Press the Start button to resume countdown.
To Reset a Running Count Down Timer
1. Press the Stop button to stop the countdown.
2. Press the Count Down button to return to the last set time.
3. Press the Start button to begin the countdown.
To Repeat the Last Completed Countdown
1. Once the alarm is beeping, press the Stop button to stop the alarm.
2. Press the Start button to restart the countdown from the last set time.
(Note: The Count Down timer does not run in the background. It defaults to
the last set countdown time when entering the Count Down timer from any
other mode.)
Visual Display and Warning Sound
The top display visually depicts the
time remaining. Each bar turns off
after an additional 10% of the total
time has elapsed. After 80% elapsed
time, a warning beep sounds and the
last two bars blink slowly. After 90%,
the arrow blinks quickly. At 00:00, the
alarm sounds and the top display reads,
“TIME’S UP!”
Start:
All bars visible
80% Elapsed:
2 bars visible,
warning beep
90% Elapsed:
Arrow visible
Time’s Up:
Alarm sounds