KAESER KOMPRESSOREN MOBILAIR M27, Руководство оператора

Страница: 38 / 304

➤ Then open an outlet valve carefully to ensure that the line between the minimum pressure /
check valve and the compressed air outlet is vented.
➤ Do not carry out welding, heat treatment or mechanical modifications to pressurized compo‐
nents (e.g. pipes and vessels) as this influences the component's resistance to pressure.
The safety of the machine is then no longer ensured.
Compressed air quality
The composition of the compressed air must be suitable for the actual application in order to pre‐
clude health and life-threatening dangers.
➤ Use appropriate systems for air treatment before using the compressed air from this machine
as breathing air (fresh air reinforcement) and/or for the processing of foodstuffs.
➤ Use food grade cooling oil whenever compressed air is to come into contact with foodstuffs.
Spring forces
Springs under tension or compression store energy. Uncontrolled release of this energy can cause
serious injury or death.
Minimum pressure / check valves, safety relief valves and inlet valves are powerfully spring-loaded.
➤ Do not open or dismantle any valves.
Rotating components
Touching the fan wheel, the coupling or the belt drive while the machine is switched on can result
in serious injury.
➤ Do not open the access doors or panels while the machine is running.
➤ Prior to opening the service doors or the enclosure, switch off the engine, disconnect from
power source, verify that no voltage is present, and secure against unintended reactivation.
➤ Wear close-fitting clothes and a hair net if necessary.
➤ Ensure that all covers and safety guards are in place and secured before restarting.
Temperature
The operation of the combustion engine and the compression generate high temperatures. Touch‐
ing hot components may cause injuries.
➤ Avoid contact with hot components.
These include, for example, engine, compressor airend, oil and compressed air lines, coolers
and oil separator tank. Any objects in or near the flow of exhaust gas or discharged cooling air
will become very hot.
➤ Wear protective clothing.
➤ Wear protective gloves when connecting or disconnecting compressed air hoses.
➤ Allow the machine to cool down before commencing any maintenance work.
➤ If welding is carried out on or near the machine, take adequate measures to prevent sparks or
heat from igniting oil vapors or parts of the machine.
Noise
The enclosure absorbs the machine noise to a tolerable level. This function will be effective only if
the body is closed.
➤ Operate the machine only with closed body.
3 Safety and Responsibility
3.5 Dangers
26
Operator Manual Screw Compressor
MOBILAIR M27
No.: 9_9547 13 USE