KAESER KOMPRESSOREN M170 Скачать руководство пользователя страница 160 | Manualshive

Страница: 160 / 280

KAESER KOMPRESSOREN M170 Скачать руководство пользователя страница 160

10.9.2.1 Draining condensate

Material Receptacle

Cleaning cloth

1. Place the receptacle under the combination filter hose lines.
2. Open the pre-filter and micro-filter condensate drain shut off valves.
3. Close the door.
4. Switch the machine on and run it in IDLE mode.

The condensate collecting in the filter housings is blown out.

5. Stop the compressor as soon as air escapes.
6. Open the right-hand access doors.
7. Close the shut-off valve.
8. Close the doors.

Condensate must be stored in suitable containers and disposed of in accordance with local

environmental regulations.

10.9.2.2 Changing the filter elements

The pre-filter and micro-filter contain different elements and these must be changed as a pair. Note

their positioning!

Do not touch the new filter elements with bare fingers, as this will impair their function!
Using the combination filter without an element installed is not permitted.

Material Spare parts

Filter wrench
Wrench
Cleaning cloth
Clean fabric gloves

Precondition Machine is cooled down.

The «battery isolating switch» is off.

Ensure that the combination filter is not under pressure.

➤ Slowly open the pre-filter and micro-filter condensate drain shut off valves.

Remaining pressure escapes.

Changing the pre-filter element:

1. Unscrew and remove the drain hose from the filter housing.
2. Unscrew the filter housing counter-clockwise.
3. Draw the filter element down and out.
4. Clean the filter head, housing and sealing surface with a lint-free cloth.
5. Check the housing gasket.

Housing gasket is damaged: replace gasket.

10 Maintenance

10.9 Options

148

Service Manual Screw Compressor
M170 SIGMA CONTROL MOBIL

No.: 9_9425 01 E

«
...
158
159
160
161
162
...
»

Содержание M170

























































































































































































































































































Отзывы:

Нет отзывов