KAESER KOMPRESSOREN CSD 82, Руководство по обслуживанию

Страница: 46 / 126

Event Recognition and Fault Rectification
9 --- 38
Message KAESER service
technician only Action Possible cause
EMERGENCYSTOP EMERGENCY STOP
button pressed. Unlatch the push-
button.
ext. message 0 Rectify fault.
...
ext. message 5
Fan M2 I First fan motor shut
down because of
overload. Investigate cause.
Reset overload trip.
Fan M3 I Second fan motor
shut down because
of overload. Investigate cause.
Reset overload trip.
Fan M4 I Third fan motor shut
down because of
overload. Investigate cause.
Reset overload trip.
HT cell Fault in the high ten-
sion cell. Check high tension
cell.
mains cont. off? The mains contactor
does not drop out
despite an OFF
command. Check auxiliary con-
tact block.
Check 230 V avai-
lable for the contac-
tor.
mains cont. on? The mains contactor
does not pull in de-
spite an ON com-
mand. Check auxiliary con-
tact block on K1M.
Check 230 V avai-
lable for the contac-
tor.
mains monitor Fault in mains power
supply. Have the mains po-
wer supply checked.
model Machine model in-
distinct Re---enter model
name
Exchange controller
motor I Drive motor shut-
down because of
overload. Change the oil sepa-
rator cartridge.
Check minimum
pressure/check
valve.
Investigate cause.
motor T Drive motor over-
heated. Ensure adequate
ventilation.
Install an extractor.
Clean the motor.
motor bearings Drive motor bear-
ings overheated. Grease the motor
bearings with the
greasing device. Change motor bear-
ings.
neutral p ---switch Rectify fault
neutral T---switch Rectify fault