1 11 2
MODBUS RTU Settings –
Data Read Protection
This is the section which is used to give reading allowance to the device
parameters and data when connection is made externally via MODBUS
RTU.
The required condition is selected for function by using
up or down keys. “Select”
key is pressed to take them
into the memory. “Save changes?” message will appear
on the screen. Pressing “OK” key, the value is taken into
the memory.
Apply
▲ +
▼ -
Disable
Data reading protection
1 11 3
MODBUS RTU Settings –
Data Write Password
Data writing password
0000
Apply
▲ +
▼ -
◄
The password should be entered to write data. This is the section in
which the password is entered. The value is setup to the required
value by using the up and down key starting from the digit where the
blue line is. Then left key is pressed and the blue underline moves
next to the left digit. All values are entered in the same way by using
up and downkeys. “Select”
key is pressed to take them into the
memory. “Save changes?” message will appear on the screen.
Pressing “Okay” key, the value is taken into the memory.
P.S.: The security increases when giving different passwords for
writing and reading data.
1 11 4
MODBUS RTU Settings –
Data Read Password
Data reading password
0000
Apply
▲ +
▼ -
◄
The password should be entered to read data. This is the section in
which the password is entered. The value is setup to the required
value by using the up and down key starting from the digit where the
blue line is. Then left key is pressed and the blue underline moves
next to the left digit. All values are entered in the same way by using
up and downkeys. “Select”
key is pressed to take them into the
memory. “Save changes?” message will appear on the screen.
Pressing “Okay” key, the value is taken into the memory.
P.S.: The security increases when giving different passwords for
writing and reading data.
1 11 5
MODBUS RTU Settings –
Port Settings
Modbus Settings
Baud Rate
Stop Bits
Parity
Device No
Modbus Settings
Baud Rate
Stop Bits
Parity
Device No
9600
Apply
▲ +
▼ -
◄
Modbus Settings
Baud Rate
Stop Bits
Parity
Device No
19200
1
No
1
Exit
▲
▼
Select
Cancel
Exit
Okay
Modbus Settings
Baud Rate
Stop Bits
Parity
Device No
9600
1
No
2
Modbus Settings
Baud Rate
Stop Bits
Parity
Device No
9600
1
No
002
Apply
▲ +
▼ -
◄
Modbus Settings
Baud Rate
Stop Bits
Parity
Device No
9600
1
No
1
ESC
▲
▼
Select
Cancel
Exit
Okay
Save
Changes ?
This is the section in which Modbus port setup is entered.
Baud rate:
It can be selected as 2400,4800,9600,19200,28800,38400,57600 or 115200.
Stop Bits :
It can be selected as (0.5) , (1) , (1.5) or (2).
Parity :
no , even , odd
Up or down key is used for the entry of above parameters.
“Select”
key is pressed to take them into the memory. “Save changes?” message
will appear on the screen. Pressing “Okay” key, the value is taken into the memory.
Device No :
001 .....255
The value is setup to the required value by using the up and down key starting
from the digit where the blue line is. Then left key is pressed and the blue underline moves next to
the left digit. All values are entered in the same way by using up and downkeys. “Select”
key is
pressed to take them into the memory. “Save changes?” message will appear on the screen.
Pressing “Okay” key, the value is taken into the memory.
1
No
1
9600
1
No
1
Save
Changes ?
1
3 4 5
7
9 10 11 12
2
6
8
1
3 4 5
7
9 10 11 12
2
6
8
1
3 4 5
7
9 10 11 12
2
6
8
1
3 4 5
7
9 10 11 12
2
6
8
1
3 4 5
7
9 10 11 12
2
6
8
1
3 4 5
7
9 10 11 12
2
6
8
1
3 4 5
7
9 10 11 12
2
6
8
1
3 4 5
7
9 10 11 12
2
6
8
1
3 4 5
7
9 10 11 12
2
6
8
