Page 6
Operating Instructions Powador 1501xi/2501xi*/3501xi/4501xi/5001xi**
All warranty claims must be handled at the premises of KACO
new energy GmbH. The unit must, where possible, be returned
in its original or equivalent packaging. The costs for these serv-
ices cannot be borne by KACO new energy GmbH.
KACO new energy GmbH will perform warranty services only
if the defective unit is returned to KACO new energy GmbH
together with a copy of the invoice which was issued to the user
by the dealer. The name plate on the unit must be fully legible.
If these requirements are not fulfi lled, KACO new energy GmbH
reserves the right to deny warranty services.
The warranty period for repairs or replacement deliveries is six
months after delivery. However, it continues at least until the
end of the original warranty period for the delivery item.
3.3 Service
We place special emphasis on the quality and longevity of our
inverters, starting with the product development phase. More
than 60 years of experience in the fi eld of current inverters
support us in this philosophy.
However, despite all quality assurance measures, faults may
occur in exceptional cases. In such cases, KACO new energy
GmbH will provide you with the maximum possible support.
KACO new energy GmbH will make every effort to remedy such
faults in an expeditious manner and without a great deal of
bureaucracy. In such cases, contact our service department
directly by telephone at
+49 (0)7132-3818-660
4 Operation
The grid feed process begins in the morning if suffi cient light
is available, and, therefore, if a certain minimum voltage is
present in the inverter. The inverter enables grid feed after a
country-specifi c start-up period (see Installation Instructions,
section 4, Technical Data).
If, as nightfall approaches, the voltage drops below the
minimum voltage value, grid feed mode ends and the inverter
switches off.
4.1 Overview of controls and displays
Figure 4.1:
Overview of the Powador
Legend
1
Display
Display of measured values and confi guration para-
meters
2
LED displays
Display of the operating state
3
Control keys
Switch between display and confi guration
of
parameters
4
Cable feedthrough for DC connection
5
Night start-up key
For activating the display after nightfall
6
RS232 interface
7
Cable feedthrough for RS485 interface cable
8
Cable feedthrough for AC connection
S e c t i o n 3 ·
N o t e s o n I n s t a l l a t i o n a n d O p e r a t i o n
S e c t i o n 4 ·
O p e r a t i o n
CAUTION
Incorrect use is prohibited.