KACO blueplanet 3.0 NX1 M2 KACO blueplanet 3.7 NX1 M2 KACO blueplanet 4.0 NX1 M2
KACO blueplanet 5.0 NX1 M2
Page 2
1.3
Connectivity
Initial start-up of the inverter is carried out via a HOT spot WLAN connection between the communication device (WLAN-
Stick) connected to the inverter and a mobile device with installed “KACO NX Setup” APP.
There are two ways to connect with the hot spot created by the communication device:
•
Establish a simplified connection with the communication device by opening the APP and reading in the QR code on
the communication device with Installation Mode.
•
Connect by scanning the QR code on the communication device with the APP or open the WLAN setting of your
mobile terminal unit, select a WLAN with the designation
B0…….
and enter the password.
Note:
The SSID name and password of the communication device are printed on the communication device.
1.4
Authorisation
NOTE
In order to use the full range of functions of the KACO NX app, you should accept
all
requested
authorisations.
The current description represents the SW version 1.06. APP-Note will be updated as soon
as newer software versions are available in order to inform you about the latest functions.
The app does not use these authorisations to record the user’s telephone data.
NOTE
Our KACO homepage offers a wide range of further product information to assist you during start-up. You
can find this information in the download area under:
https://kaco-newenergy.com/de/downloads/
Follow the
QR code link
on the cover sheet to view the installation and start-up video.
NOTE
No
passcode
is required for
initial start-up
. A passcode must be entered again if it becomes necessary to
change the parameters of the device after initial start-up.
The specific passcode for the inverter can be requested from KACO Service.
newenergy.com/de/service/kundendienst/
NOTE
Frequency band
Before configuring the network, you should make sure that the WLAN router supports
the 2.4G frequency band. The communication device can only be operated in the 2.4G-frequency band.
Installation location
For a stable connection, the communication device and inverter should not be more than 10 m from the
router.
Availability of SSID and router password
The communication device only supports 32 characters for SSID and password.
NOTE
We recommend connecting the communication device to the customer's WLAN. If the signal quality of the
network is not sufficient or not available, you can only continue with a hot-spot connection.
To use the monitoring and control functions (Monitoring Portal "blueplanet web"), there must be a
connection to the Internet via the customer WLAN.