Kabuto Japan FF-5V, Инструкция по эксплуатации

Страница: 19 / 27

ENG
ENG-17
CAUTION
●Attaching the wrong side of the inner foam into the cheek pad may cause a
significant deterioration of fitting.
●Be sure to attach the correct side of the inner foam.
CAUTION
●The interiors of this helmet are washable by a washing machine. Put each pad
in a washing net and wash them separately.
●Use detergent in cold water or warm water for cleaning. Never use hot water,
chemical detergents, and organic solvents for cleaning the pads. The use of
these agents may degrade the quality and damage the pads.
●Even commercially-available detergent may cause a little discolouration of the
pad depending on the type of detergent. Thus, wash each pad separately as
much as practical.
●If the pad is washed in a washing machine having a drying function in which the
temperature is increased to 50 or more, it may cause deterioration in quality
and damage of the pads. Do not use such a device for cleaning of the pad.
● Drain a pad after washing and dry the pad in shade so that it is not exposed to
direct sunlight. After making sure that it is dried enough, attach it on the helmet.
●The inner pad and the cheek pad are consumable items. Even under normal
usage, the fabric material and inner foam may be worn and deteriorated
depending on the frequency of usage. Please replace the pads with new ones as
appropriate.
Lock-Cloth Hole for chinstrap
Interlining
back of a cheek pad
Fig. 3
③
1 7
Cleaning of Inner Pad, Cheek Pads and Chinstrap covers
IMPORTANT
Let the “Lock-cloth” go through the cheek pad from the front then fasten the hook
and loop fasteners on the back.
Do not cover the hook-and-loop
fastener by the interlining.
CAUTION
● Attaching the wrong side of the inner foam into the cheek pad may cause
● Be sure to attach the correct side of the inner foam.
● The interiors of this helmet are washable by a washing machine. Put each pad
in a washing net and wash them separately.
● Use detergent in cold water or warm water for cleaning. Never use hot water,
chemical detergents, and organic solvents for cleaning the pads. The use of
these agents may degrade the quality and damage the pads.
● Even commercially-available detergent may cause a little discolouration of
the pad depending on the type of detergent. Thus, wash each pad separately
as much as practical.
● If the pad is washed in a washing machine having a drying function in which
the temperature is increased to 50
o
C or more, it may cause deterioration in
quality and damage of the pads. Do not use such a device for cleaning of the
pad.
● Drain a pad after washing and dry the pad in shade so that it is not exposed to
direct sunlight. After making sure that it is dried enough, attach it on the
helmet.
● The inner pad and the cheek pad are consumable items. Even under
normal usage, the fabric material and inner foam may be worn and
deteriorated depending on the frequency of usage. Please replace the pads
with new ones as appropriate.
Cleaning of Inner Pad, Cheek Pads and Chinstrap covers
Let the “Lock cloth” go through the cheek pad from the front then fasten the hook
and loop fasteners on the back.
Hole for chinstrap
Do not cover the hook and loop
fastener by the interlining.
Hook and loop
fastener
Interlining
Back of a cheek pad
Lock cloth
IMPORTANT
Fig.3
c