Kabuto FIGO, Инструкция по эксплуатации

Страница: 14 / 16

Attention!
A.I. Net
Please refer to Parts List on our website for more information about replacement.
http://www.ogkhelmet.com/
Replacement FIGO linings
4
●Hold securely around the edge of the Cranium-Lock-8 when removing it from the helmet,
otherwise, the Cranium-Lock-8 may be damaged.
●Pull the A.I. Net carefully when detaching it from the helmet. Pulling it forcibly may cause
the A.I.Net damaged and /or the hook and loop fastener come off.
●Attach the A.I.Net securely according to the above. Using the wrinkled A.I.Net may cause
uncomfortable fit.
●
To remove the A.I. Net
：
First, detach the Cranium-Lock-8 from the helmet by pulling it from the point where circled
in the above and then remove the A.I.Net.
●
To attach the A.I. Net ：
① Pass the both sides of the Cranium-Lock-8 through the A.I.Net. Insert the Cranium-Lock-8 in
the attachment holes on the both sides. (See Fig.1)
② Attach the hook and loop fastener of the A.I. Net on the right position. (See Fig.2)
（Fig.1）
（Fig.2）
Attachment
hole
Changing the A.I.Net
FRONT
Attach the
Cranium-Lock-8 here.
Attach the
Cranium-Lock-8 here.
* Set the Cranium-Lock-8 in the
attachment holes on the both sides.
Cranium-Lock-8
Strap
Cranium-Lock-8