Kabuto AERO-V1, Инструкция по эксплуатации, Страница: 21 / 28

WARNING!
Kabuto’s helmet adjusters are developed exclusively to each
model. Please confirm the model at purchasing the replacement.
Shield
(Optional accessory)
4
Replacement XF-7 Adjuster
Please refer to Parts List on our website for more information about
replacement.
Optional AR-3/ARS-3 shield
Please refer to Parts List on our website for more information about
replacement and optional AR-3/ARS-3 shield.
XF-7 Adjuster is available as a replacement part.
Replacement
XF-7 Adjuster
Please confirm the shield is attached correctly. When the attachment is incorrect, the
shield may fall off while riding a bicycle, which can be very dangerous.
Shield is an expendable item. It is very dangerous to use the shield with scratches, which
will hinder your vision. Please replace the shield with a new one once it is scratched.
The shield is attached on the helmet with magnets.
Do not make strong force on the shield. Shield
may detached.
CAUTION!
CAUTION!
http://www.ogkkabuto.com/
http://www.ogkkabuto.com/
20
This helmet is designed in such a way that the optional
shield can be attached to it. The shield when it gets
close to the position as shown in the right illustration, it
is secured in its designated place with magnet force.
In detaching the shield, it must be held firmly and
pulled out.The shield can be attached upside down as
illustrated.
The shield is designed to accommodate ordinary-shaped eye
wear without any interference with it; however, some glasses
cannot be used behind this shield depending on their
shapes. The front spacer with which the shield position is
adjusted to some extent is also available as an optional part;
please refer to page 21 for its details.
Replacement XF-7 Adjuster
Shield
Shield
Magnet