Kabuto AERO-R2 Series, Инструкция по эксплуатации

Страница: 63 / 74

① Detach the inner pads.(Front pad,Top pad)
Front
Front pad Front pad
Mount
(4 points)
Front pad
Pull forward while holding down
the temple guide.
Mount Mount
Temple guide Temple guide
Front
Top pad Top pad
Mount
(4 points)
Top pad
Pull forward
Mount
The front pads are secured with a snap system.
Firmly hold the Front Pad at the parts attached to the mounts indicated
by the circles ( ) and pull it toward you to remove it from the helmet.
*There are four mounts.
The top pads are secured with a snap system. Firmly hold the top Pad at the parts attached to the mounts
indicated by the circles ( ) and pull it toward you to remove it from the helmet.
*There are four mounts.
Detach KBF-2 Adjuster
13. Detach/Attach KBF-2 Adjuster
Never detach the adjuster unless you need to replace the parts.
�Lace is a delicate material, so please be gentle when removing it so that it does not
become folded. Failure to do so may cause the adjuster to malfunction.
�When removing the adjuster, be sure to remove it by holding the adjuster near the
fixed part. Twisting or otherwise forcibly removing the adjuster may cause damage.
Cautions
26