har
dw
ar
e k
e
y
A
F
H
G
I
J
H
14mm
wood screws
door brackets
G
I
J
J
m5 8mm
screws
m5 16mm
screws
m6 16mm
wood screws
p.
4
Ver. 2
W-50530
st
ep 2
attaching door panel
adjusting door panel
11.
12.
(ii)
(i)
attaching door brackets
9.
10.
Align each door mount bracket (F) with the pre-drilled holes and
fix to the door panel using 4 x 14mm wood screws (G) as pictured
above. Ensure the open side of the bracket faces inward and that
the height adjustment screw hole is facing down.
Half screw the 2 x M6 16mm screws (H) into the height adjustment
holes of the door mount brackets as pictured above.
Mark out and pre-drill four holes on the inner side of your cabinet
door as pictured above. Use a 2mm drill bit to pre-drill holes
to a depth of roughly 2.5mm.
2 x 11L
side mount pullout bin
37mm
37mm
195mm
195mm
291mm
291mm
F
H
Slide the door mount brackets onto the runner brackets (i),
ensuring the height adjustment screws (H) slip into the notches
(ii). Screw through the top and bottom holes of the runner
brackets, ensuring they are as centred as possible, using 4 x M5
16mm screws (J). Next attach the 2 x M5 8mm screws (I) through
the middle holes of each runner bracket.
pre-drilling for door brackets
If required, you can now adjust the door panel by tightening
or loosening the screws as pictured above. Once door
is aligned, tighten the four screws that secure the bin frame
to the runners.
