har
dw
ar
e k
e
y
kaboodle.com.au
A
B
D
C
E
lid brackets
m4 8mm
screws
16mm
wood screws
bin frame
st
ep 2
p.
3
Ver. 2
W-50530
attaching bin frame
inserting bin lid
7.
8.
E
D
Place the bin frame (D) carefully onto the extended runners,
aligning the holes and then securing into place with the 4 x M4
8mm screws (E).
Note:
Support the runners from underneath
when screwing the frame into place. Do not tighten screws.
reassembling runners
attaching lid brackets
5.
6.
B
C
Using the top sets of pre-drilled holes, align with the 2nd, 5th
and 7th holes on the lid brackets (C) and fix to the cabinet using
6 x 16mm wood screws (B) as pictured above.
2 x 11L
side mount pullout bin
Carefully slide the guide back into the runner. The runners
should open and close smoothly if assembled correctly.
Extend the runners once they have been correctly reassembled.
Slide the back plastic catches of the bin lid along the top of the
lid brackets until both plastic catches fall into the channels at
the back. The front two plastic catches should fit into the front
channels at the same time.
