Kaba SIMPLEX LD470 Скачать руководство пользователя страница 13

Страница: 13 / 16

USING THE PASSAGE FUNCTION

H-1

Enter the user access code, followed by the “F” button.

H-2

Rotate the outside lever repeatedly. The latch should retract each time.

You are now in the passage mode.

NOTE

: To disable the passage function, depress the “F” button, followed by

the “C” button. The unit should now be locked.

I. REMOVING THE PASSAGE FUNCTION

If the passage function is not needed it can be easily removed.

I-1

Remove the 4 red screws located on the back of the outside unit assembly.

Pull the tumbler cover plate off (along with the springs) and set aside.

I-2

Depress the “C” button and hold depressed.

I-3

With the “C” still depressed, use the tweezers provided and remove the “F”

tumbler.

I-4

This tumbler hole can be left empty or replaced with a blue (uncoded)

tumbler.

I-5

Reinstall the tumbler cover plate and springs, using the 4 red screws

removed earlier.

Содержание SIMPLEX LD470

















Результаты поиска

Содержание SIMPLEX LD470

Отзывы:

Похожие инструкции для SIMPLEX LD470

Бренды по названию

Популярные бренды

Kaba SIMPLEX LD470, Руководство по установке

Результаты поиска

Содержание SIMPLEX LD470

Отзывы:

Похожие инструкции для SIMPLEX LD470

Бренды по названию

Популярные бренды