Kaba Simplex 506 Series, Руководство по установке

Страница: 22 / 28

22
K-2 Insert the release tool
(a)
through hole
in
number pad and gently
lift up loop end of the
tool to depress the code change button
until
you hear a
click
; remove tool and
do not press
any buttons
(proceed to K-3).
K-3 **This Step Is Very Important** Rotate lever
(d)
once, and only once
to clear the old combination; the
latch (e) will retract; release the lever.
K-4
Press in your
new combination
(b) followed by the
ENTER
button (c) and release.
K-5 Rotate the lever
(d)
to verify that the mortise latch
(e)
retracts confirming the validity of the new combination
(if you try the old combination now, it should not work).
IMPORTANT: The “ENTER” button must be depressed and released after
entering the combination. The latch will not retract until the “ENTER”
button is depressed and released.
COMBINATION SETTING RECORD
Combination Date
& ENTER
& ENTER
& ENTER
& ENTER
& ENTER
& ENTER
& ENTER
& ENTER
Caution: Check the operation of the latch by making sure that the
deadlatch stops against the strike and does not slide into the strike
opening when the door is closed. If that situation occurs, then a total
lockout may occur. This will void our warranty of the complete lock
mechanism. If necessary, correct the door over-travel by using the rubber
bumpers as described in Section M (Installing Rubber Bumpers).
c
c
b
b
a
d
d
e
e
LIT1051_Simplex_506x _Mortise_1012.indd 22 1/7/13 3:13 PM