background image

7

Set Lock’s Relock Time

1.

Power lock.

2.

If PIN is required, enter Master User PIN or a Manager User PIN.

3.

If PROX Card is required, present PROX Card.

4.

Press 

:

 followed by 

004

.

5.

Enter two-digit relock time (02-10 seconds).

Set Tamper Shutdown Time

1.

Power lock.

2.

If PIN is required, enter Master User PIN or a Manager User PIN.

3.

If PROX Card is required, present PROX Card.

4.

Press 

:

 followed by 

006

.

5.

Enter two-digit tamper shutdown time (00-15 minutes, 00 meaning no
shutdown).

Set Wrong Try Limit

1.

Power lock.

2.

If PIN is required, enter Master User PIN or a Manager User PIN.

3.

If PROX Card is required, present PROX Card.

4.

Press 

:

 followed by 

007

.

5.

Enter one-digit wrong try penalty limit (4-9 tries).

Toggle Daylight Savings Time/Standard Time

1.

Power lock.

2.

If PIN is required, enter Master User PIN or a Manager User PIN.

4.

If PROX Card is required, present PROX Card.

5.

Press 

:

 followed by 

010

.

Add PROX Card for Master User

1.

Power lock.

2.

Enter Master User Combination.

3.

Press 

:

 followed by 

011

.

4.

Present PROX Card to be added for Master User.

Remove PROX Card for Master User

1.

Power lock.

2.

If PIN is required, enter Master User PIN.

3.

If PROX is required, present PROX Card.

4.

Press 

:

 followed by 

012

.

5.

Present PROX Card to be removed for Master User.

Содержание PowerLever PROX 9000





















Отзывы: