Ensure that no part of the
wires are pinched or shorted
during installation. Place
excess wire in the door, and
finish installing the lock ac-
cording to the instructions in
the manual adding the spindle
connecting both sides accord-
ing to the Spindle Installation
illustration at the right.
Locate the position for the
sensor magnet. Align the
magnet with the sensor now
mounted in the door edge.
In wood, drill a
1
⁄
4
" hole to be
3/8" deep for the magnet. In
steel, use a size M (.295") drill
and mount the magnet with
the collar provided.
Caution:
The magnet is
strong. Avoid placing the
magnet near sensitive devices
such as magnetic stripe cards.
Route the wires through the door.
It is important to ensure that each
wire from the sensor is connected
to a wire extending from the lock
housing. Polarity is not required.
Insulate the junctions. Refer to the
Wire Connections at the left.
Egress Sensor
and Wire
Sensor
Wires in Lock
Outside
Lock
1. Push spindle into mating
socket of the outside hous-
ing until it ”snaps“ into place.
Rotate the spindle to have
the sharp edges horizontal.
2. Place socket
onto spindle.
The socket
has the sharp
corners
horizontal.
