background image

7

 

2 .  You have 4. up to 5 se 4.conds to push ‘#’ and re 4.le 4.ase 4. the 4. ove 4.rride 4. ke 4.y . If   

 

 

5-se 4.cond time 4.out is re 4.ache 4.d without pre 4.ssing ‘#’, the 4. lock continue 4.s  

 

 

its normal ope 4.ration . As soon as the 4. ‘#’ is pre 4.sse 4.d, the 4. lock e 4.xits the 4.  

 

 

curre 4.nt state 4. . If time 4.out is re 4.ache 4.d or if any othe 4.r ke 4.y is pre 4.sse 4.d afte 4.r  

 

 

the 4. ‘#’ was pre 4.sse 4.d, the 4. lock e 4.xits the 4. se 4.que 4.nce 4. and stays in acce 4.ss  

 

 

state 4. . If ‘#’ is pushe 4.d and re 4.se 4.t button is re 4.le 4.ase 4.d within 5-se 4.cond 

 

 

pe 4.riod, the 4. lock goe 4.s in Re 4.se 4.t Se 4.que 4.nce 4. State 4. and the 4. lock displays  

 

 

the 4. ‘Re 4.se 4.t Se 4.que 4.nce 4. In Progre 4.ss’ me 4.ssage 4. by flashing Gre 4.e 4.n and Re 4.d  

 

 

LED alte 4.rnative 4.ly once 4. e 4.ve 4.ry se 4.cond . 

 

3 .  In this state 4., use 4.rs have 4. a 20-se 4.cond pe 4.riod to e 4.nte 4.r the 4. Maste 4.r Code 4.  

 

 

to pe 4.rform a hard re 4.se 4.t . If a bad Maste 4.r Code 4. is ke 4.ye 4.d-in, the 4. lock e 4.xits  

 

 

the 4. Re 4.se 4.t Se 4.que 4.nce 4. State 4. and goe 4.s back in acce 4.ss state 4. . If the 4. corre 4.ct  

 

 

Maste 4.r Code 4. is e 4.nte 4.re 4.d within 20 se 4.conds, the 4. lock pe 4.rforms a hard  

 

 

re 4.se 4.t and goe 4.s back in unprogramme 4.d state 4. . Whe 4.n an incorre 4.ct Maste 4.r  

 

 

Code 4. is e 4.nte 4.re 4.d, the 4. Tampe 4.r Count de 4.cre 4.me 4.nts . Afte 4.r 4 unsucce 4.ssful  

 

 

atte 4.mpts to Re 4.se 4.t the 4. lock with a bad Maste 4.r code 4., the 4. lock goe 4.s in  

 

 

the 4. Tampe 4.r Shutdown state 4. for 30 se 4.conds . It will re 4.sume 4. normal  

 

 

ope 4.rations afte 4.r this de 4.lay . If no maste 4.r code 4. is e 4.nte 4.re 4.d during the 4. 20  

 

 

se 4.conds de 4.lay, the 4. lock will e 4.nte 4.r a 15 minute 4. wait pe 4.riod assuming the 4.  

 

 

Maste 4.r Code 4. is unknown .

B)  User does not know the Master code:

 

1 .  Inse 4.rt me 4.chanical ove 4.rride 4. ke 4.y, turn counte 4.rclockwise 4. and hold so that  

 

 

lock is in ope 4.n position (cylindrical latch is re 4.tracte 4.d) . Within 5 se 4.c- 

 

 

onds, pre 4.ss # and re 4.le 4.ase 4. the 4. ke 4.y (latch) . 

 

2 .  You have 4. up to 5 se 4.conds to push ‘#’ and re 4.le 4.ase 4. the 4. ove 4.rride 4. ke 4.y . If  

 

 

5-se 4.cond time 4.out is re 4.ache 4.d without pre 4.ssing ‘#’, the 4. lock continue 4.s  

 

 

its normal ope 4.ration . As soon as the 4. ‘#’ is pre 4.sse 4.d, the 4. lock e 4.xits the 4.  

 

 

curre 4.nt state 4. . If time 4.out is re 4.ache 4.d or if any othe 4.r ke 4.y is pre 4.sse 4.d   

 

 

 

afte 4.r the 4. ‘#’ was pre 4.sse 4.d, the 4. lock e 4.xits the 4. se 4.que 4.nce 4. and stays in  

 

 

acce 4.ss state 4. . If ‘#’ is pushe 4.d and re 4.se 4.t button is re 4.le 4.ase 4. within 

 

 

5-se 4.cond pe 4.riod, the 4. lock goe 4.s in Re 4.se 4.t Se 4.que 4.nce 4. State 4. and the 4. lock  

 

 

displays the 4. ‘Re 4.se 4.t Se 4.que 4.nce 4. In Progre 4.ss me 4.ssage 4. by flashing Gre 4.e 4.n    

 

 

and Re 4.d LED alte 4.rnative 4.ly once 4. e 4.ve 4.ry se 4.cond . 

 

3 .  In this state 4., use 4.rs have 4. a 20-se 4.cond pe 4.riod to e 4.nte 4.r the 4. Maste 4.r Code 4.  

 

 

to pe 4.rform a hard re 4.se 4.t . Whe 4.n the 4. use 4.r doe 4.s not know the 4. maste 4.r  

 

 

code 4., the 4. use 4.r must not e 4.nte 4.r anything during that 20 se 4.conds de 4.lay .  

 

 

The 4. Re 4.se 4.t se 4.que 4.nce 4. in progre 4.ss me 4.ssage 4. will be 4. displaye 4.d on the 4.  

  LEDs .
 

4 .  Whe 4.n the 4. 20 se 4.conds de 4.lay will be 4. e 4.xhauste 4.d, a 15 minute 4.s wait pe 4.riod  

 

 

will be 4.gin . During that state 4., any ope 4.ration on the 4. lock will be 4. ignore 4.d  

 

 

(gre 4.e 4.n LED will not blink whe 4.n pre 4.ssing ke 4.ys) and the 4. Gre 4.e 4.n and Re 4.d  

 

 

LED will blink once 4. a minute 4. .

 

5 .  Afte 4.r the 4. 15 minute 4.s de 4.lay has e 4.xhauste 4.d, the 4. Re 4.se 4.t se 4.que 4.nce 4. in  

 

 

progre 4.ss me 4.ssage 4. will be 4. displaye 4.d on the 4. LEDs again for 20 se 4.conds .  

 

 

During this pe 4.riod, the 4. use 4.r must e 4.nte 4.r the 4. 1-2-3-4-5-6-7-8-# se 4.que 4.nce 4.  

 

 

and the 4. lock will re 4.se 4.t . If the 4. use 4.r fails to do so, the 4. se 4.que 4.nce 4. will   

 

 

 

abort and the 4. lock will re 4.sume 4. normal ope 4.ration .

Содержание E-Plex 50 Series





































Отзывы: