Kaba Mauer GmbH
82011 Code-Combi KL
Page
GB
Contents
1
Working instructions ..................................................................................................
2
Signals and what they mean ...................................................................................... 7
3
Lock functions ............................................................................................................ 7
3.1
Opening with master code
3.2
Opening with user code
3.3
Opening after 3 or more incorrect code entries
penalty time
3.4
Alteration of master code
3.5
Locking
4
Power supply............................................................................................................... 9
4.1
Changing the battery
4.2
Emergency power supply
1 Working Instructions
Important points
• Before putting the lock into operation, please read the instructions carefully.
• All instructions exclusively refer to the lock and not to possible control elements of the safe.
• Carry out the programming sequences with the lock and the safe opened.
• Every correct entry keyed in and recognised by the lock is confirmed by an acoustic signal.
These confirmation signals are not taken into consideration in the following notes.
• You have 20 seconds for each entry keyed in. If you have not pressed a key within this 20
second period, the electronic system will close down automatically. Operations not fully
completed have to be re-started.
• Code entries can be interrupted by pressing the P button.
• The lock is set at the master code
1 2 3 4 5 6 7 8 when supplied. Alter this code immediate-
ly to your own master code for security reasons. Do not use any personal or other similarly
well known data in the selection of this master code.
General instructions
• The lock is designed for usage in the temperature range from +10 °C to +50 °C and humid-
ity between 30 % to 80 % non-condensing.
• The lock should be cleaned using a damp cloth only (do not use any aggressive cleaning
agents).
• The lock may only be fitted by qualified personnel.
• The lock must not be lubricated.
• Never open the lock casing. Should dismantling be required on the fittings, please carry
this out in strict accordance with the operational instructions provided. Failure to comply
with this will endanger the correct functioning of the lock and result in your losing warranty
entitlements.