Kaba Mauer Code-Combi B, Инструкции по эксплуатации

Страница: 31 / 62

Page 30 82132 Code-Combi B Kaba Mauer GmbH
GB
4.3 Ordinary dual code mode function
dual code
4.3.1 Activation of ordinary dual code mode by primary code holder
This action deletes the primary code and replaces it with a dual code. The lock can only be
opened by a combination of the 1
st and 2 nd part of the code (mutual check principle).
1) Open lock with valid 6-digit primary code (see 4.1.1)
2) Press ON
3) Press P
4) Enter valid 6-digit primary code again
5) Press P
6) Press 7
7) Enter new 6-digit 1 st part of combination / 2 x
8) Enter new 6-digit 1
st
part of combination again 1 x
9) Enter new 6-digit 2 nd part of combination / 2 x
10) Enter new 6-digit 2 nd part of combination again 1 x
11) Test newly programmed dual code by locking and opening once more
If the new partial combinations are not correctly confi rmed, the signal 3 x appears.
Repeat the sequence.
The correct sequence of the partial combinations and its repeated confi rmation must be
adhered to.
4.3.2 Opening with dual code by dual code holder
1) Press ON
2) Enter 6-digit 1 st part of combination 1 x
3) Enter 6-digit 2 nd part of combination 1 x
4) Within 4 seconds turn bar handle clockwise until stop position reached
The correct sequence of the partial codes must be adhered to. In order to open the lock the
1
st part of the combination has to be entered followed by the 2 nd part of the combination.