background image

9

U

SING

 

THE

 X-09

If you have not read the section on “Dialing the X-09”, it is important that 
you do so before proceeding. 

SINGLE COMBINATION MODE

In this mode the X-09 functions much like a standard combination lock.  It will open any time 
the three-number combination is correctly dialed.

1. Dial

 left

 (CCW) until lock is “powered”.

2. Dial the 

combination 

in the correct manner to open the lock; i.e., 

left 

(CCW) to dial 

the fi rst  number, 

right

 (CW) to dial the second number, 

left

 (CCW) to dial the third 

number.

 

EXAMPLE: Combination = 30-60-90

Dial 

left

 to the fi rst number, 

30

. Stop.

Dial 

right

 to second number, 

60

. Stop.

Dial 

left

 to third number, 

90

. Stop.

3. Dial 

right

 (CW). After 

OP

 with a right arrow (

OP

en right) is displayed, continue dialing 

to the right to retract the lock bolt.

 Note: 

If at any time the dial remains stationary for more than 40 seconds, the 

lock will reset (LCD will go blank) requiring the operator to redial the entire 
combination.

DUAL COMBINATION MODE

In this mode, two combinations must be correctly and consecutively entered to open the 
lock. Either combination may be entered fi rst;  however, 

the second combination must be 

started within 40 seconds after the fi rst combination is completed.

First Operator:

1. Dial

 left

 (CCW) until lock is “powered”.

2. Dial the 

fi rst combination 

in the correct manner to open the lock; i.e., 

left 

(CCW) to 

dial the fi rst number, 

right

 (CW) to dial the second number, 

left

 (CCW) to dial the third 

number.

 

EXAMPLE:  Combination = 25-50-75

Dial 

left

 to fi rst number, 25. Stop. 

Dial 

right

 to second number, 50. Stop. 

Dial 

left

 to third number, 75. Stop. 

3.  Dial to the 

right

 (CW) until 

C2

 (enter 

C

ombination 

2

) is displayed. 

Second Operator:

4. Dial 

the 

second combination 

in the correct manner to open the lock; i.e., 

left 

(CCW) 

to dial the fi rst number, 

right

 (CW) to dial the second number, 

left

 (CCW) to dial the 

third number.

 

EXAMPLE:  Combination = 30-60-90

Dial 

left

 to fi rst number, 30. Stop. 

Dial 

right

 to second number, 60. Stop. 

Dial 

left

 to third number, 90. Stop.

5. Dial 

right

 (CW). After 

OP

 with a right arrow (

OP

en right) is displayed, continue dialing 

to the right to retract the lock bolt.

Содержание X-09


















Отзывы: