background image

1

I

NTRODUCTION

The combination door unit can be added to the X-09 lock to form the CDX-09. This 
adaptation allows you to have access control on any door.

PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO 
INSTALL AND OPERATE YOUR CDX-09 LOCK ASSEMBLY.

CDX-09 O

PERATING

 I

NSTRUCTIONS

Please read all instructions carefully before attempting to operate your CDX-09 
Lock Assembly.  

The specifi c instructions for operating the X-09 Combination Lock itself are found in 
the “Operating Instructions” booklet for the X-09 Type 1F Lock (P/N 520.021) which 
is enclosed in this Operating/Installation Instruction Kit. 

Please refer also to the Model CDX-09 Lock System drawing (P/N 524.021) for lock 
nomenclature which is also included in this kit. 

TO OPEN THE CDX-09 FROM THE OUTSIDE

1.  Dial the combination per the instructions in the X-09 “Operating

Instructions” booklet.

2.  Turn the dial to the right (clockwise) to withdraw the lock bolt and pull the dead 

bolt (Extension Bolt) with it.

Note: 

When closing the CDX-09, the dead bolt will not extend until the release bolt 

hits the door strike as the door closes.

Life Safety Switch

Serial Number

Label

Lock On Back Cover Pin

Release Knob

Dead Bolt

Release Bolt

Содержание CDX-09











Отзывы: