kas.com.au
8
Verison: UG_V002
5
Management Instructions
5.1
Factory Reset
The lock will be in factory reset with the management pin code default
‘123123’. ALL programmed data will be deleted
a. Open battery cover on the inside of the door.
b. Hold the default switch in the back plate for 3 seconds [Figure 13.3]
c. LED will illuminate and a ‘beep…’ sound will be heard.
5.2
Program Management Pin Code
This is the highest authority and has the ability to open the lock and
change/remove any other pin code, card/FOB or remote. It can only be
altered by completing the
Factory Reset [5.1] or Program
management pin code [5.2].
a. Power on by touching the screen, then press " * "
b. Enter old management pin code, then press " * " (A long beep will sound)
c. Press " 0 ", then press " * "
d. Enter new management pin code, then press " * " (A long beep will sound)
e. Setting complete. Press " # " to exit or wait for auto power off
NOTE: The management pin must be
6
digits long (Any other code can be
3 to 6 digits)
5.3
Log into “Settings Management”
You will need to log into "setting management” before altering/removing
any pin codes/cards/FOB’s/remotes.
a. Power on by touching the screen, then press " * "
b. Enter management pin code, then press " * " (A long beep will sound)
c. Proceed to desired settings
