3
the upper right corner of the LED screen).
Press the mode button for 5 seconds to turn off the remote transmitter.
2. Press the
button on the collar, and you should hear a beep, and the green LED light
should turn on. Then hold the
button for 5 seconds and the green LED light keep on, 5
seconds after the green light will flashing
and hear “beep” again.
Power Button / Synchronization Button: Press the button to turn on / off the receiver. Press
the button for at least 5 seconds to enter into synchronization mode.
LED Light: Flashes when turned on; fast flashes when synchronizing.
3. Now press
to switch mode, and press the button on the remote. An icon will
show it
is
paired
successfully.
If
not,
please,
press
the
RESET button
and repeat the
steps
above.
◎
Matching the second receiver
If you have another receiver, press the CHANNEL button
and select CHANNEL
2
(the icon
will appear at the upper right corner of the LED screen).
Please
follow
steps 1 to 3 above to finish matching the receiver.
◎
Intensity Regulation
The shock and vibration function has levels 0 to 100. Use the UP/DOWN
buttons on the right hand side to increase/decrease levels as needed.
