2
◎
Charging
1. Charging the remote transmitter
Connect the power cord to the charging port. After plugging
the charger into a standard outlet,
the LED light on the receiver
should flash red. Charge the transmitter at least 6 hours for the
first charge. After fully charged, the LED light will automatically
turn off.
2. Charging the receiver
After plugging the charger into a standard outlet, the LED light on the
receiver collar will be lighted. Charge the receiver at least 6 hours for
the first charge. After fully charged, the LED light will turn green.
Is charging
Fully charged
Low battery indicator: the symbol
will show on the right bottom corner of the LCD
screen.
Note:
l
Insert the power cord into the charging port vertically. Do NOT insert it in a
skewed angle. Doing so may damage the cord or the port.
l
Adapter charger not included. Please DO NOT use a charger over 5V1A.
Otherwise, you may damage the remote or the receiver!!!
◎
Setting it up
1. Press the
button on the controller, then the controller should be turned on. Press
the CHANNEL button
and select CHANNEL
1
(the small icon
can be seen at