4 Bluetooth connection
The K6 Bt has to be connected to the GPS device and to the voltage supply first. Afterwards
bluetooth has to be activated at the Pocket PC and a search for bluetooth devices can be started.
After a few moments the Bluetooth device finds the K6 Bt.
The identification of the K6 Bt always begins with „K6BT“. The pre-set identification and is printed
on the label on the K6 Bt's housing. Establish a connection and enter the password.
On most bluetooth devices these steps have to be taken only once and for the future the device
automatically connects to the K6 Bt.
After connecting a new serial port (COM port) at the bluetooth device is available. The COM port
number may differ from device to device. Consult the manual of your bluetooth device.
Start the program which should receive data from the K6 Bt and choose the serial port assigned to
the bluetooth connection in the settings dialogue.
5 Specification
dimensions
ca. 72x50x28mm³
connection ports
2x RJ45 connection ports with IGC-compliant pinout
Power supply
5 to 15V by one of the connection ports
•
configurable with jumpers
•
reverse voltage protection (not for connected devices!)
•
fuse 0.5 up to 2A
Current drain
ca. 60mA
baud rates
2400, 4800, 9600, 19200, 38400, 57600, 115200 baud
automatic baud rate identification for NMEA0183-compliant datasets
baud rate changeable via bluetooth (see separate documentation for
software developers)
Bluetooth-Spezifikation
Bluetooth v2.0+EDR, 2,4GHz, range: up to 20m
encrypted data communication over serial port profile (SPP)
K6 Bt
2
Manual
6
