1 Express manual for initial operation
Requirement for a fast initiation is a configuration as delivered:
•
power supply on both connectors (see chapter 2.1)
•
automatic baud rate identification (see chapter 3)
•
bluetooth password known (pre-set identification and is printed on the label on the K6 Bt's
housing)
Connecting K6 Bt in 5 steps
1. Connect the GPS device using a 1:1 patch cable with the K6 Bt (see image 1)
•
details see chapter 2.1
image 1: connection of K6 Bt with GPS device and power supply
2. Connect the K6 Bt to the existing cable of the planes power supply
•
the GPS device is supplied via the patch cable
3. The baud rate will be identified automatically
•
the GPS device has to be switched on!
•
the red LED begins with blinking and glows out after a few seconds (details see
chapter 2.2)
4. Connect the bluetooth device (PDA, smartphone, Tablet or PC) over bluetooth with the
K6 Bt
•
activate bluetooth and search for new bluetooth devices (detailed action depends on
device and operation system). The bluetooth ID of K6 Bt begins with „K6BT“. The pre-
set identification and is printed on the label on the K6 Bt's housing. Establish a
connection and enter the password.
•
After connecting a new serial port (COM port) is available. The COM port number
may differ from computer to computer.
5. Start the program which should receive data from the K6 Bt and choose the serial port
assigned to the bluetooth connection in the settings dialogue.
finished!
K6 Bt
2
Manual
2
K6 Bt
GPS-Gerät
(Logger, Flarm, Vario...)
12V + Daten
12V
Stromversorgung
Pocket PC
