6
Laser Settings
The Laser Defuser g5 can be configured to one of three different
operational settings:
Constant
Upon receiving a laser signal,
Transmit
the Laser Defuser g5 will
continuously transmit a jam-
ming signal for the duration
of the laser encounter. This is
the factory default setting.
Pulse
Upon receiving a laser signal,
Transmit
the Laser Defuser g5 will
transmit a jamming signal for
10 seconds and then cease
firing for the duration of that
encounter.
Receive Only
The Laser Defuser g5 will only
detect laser. No jamming
signal will be emitted.
•
For aggressive drivers at higher speeds.
•
Gives the driver more time to decelerate.
•
Higher potential for jamming all the
way to the laser gun location.
•
For moderate to aggressive drivers.
•
Gives the driver the time to check and
reduce speed to avoid a speeding
ticket while allowing the police officer
to obtain a lower speed reading, elimi-
nating suspicion of “jamming.”
•
For notification only. Officer will obtain a
speed reading on your vehicle in this
setting.
Alerts from Non-Police Signals
Your K40 RL360i / RL200i is sensitive enough to detect signals gen-
erated by non-police equipment, such as automatic doors. To learn
how to minimize these signals, please read about FILTER options
(page 7), Quiet Ride function (page 8), and Mark to Mute (page 9).
K-Band Filter
Your RL360i / RL200i rejects alerts from vehicles on the road (includ-
ing your own) equipped with radar-based safety features, such as
collision avoidance. Police radar reception and detection range is
unaffected by this feature.
Traffic Sensor Filter
Your RL360i / RL200i will reject alerts from traffic flow sensors usu-
ally encountered during highway driving. Enable this filter through
the menu (pages 11-13).
Laser Settings
Description
Recommended Use
