K2L MOST150 Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 24

K2L MOST150 Скачать руководство пользователя страница 11

MOST150 E-O Converter

© 2015 - 2017 K2L GmbH & Co. KG

11

DS60001342C

K2L - USER’S GUIDE

2.1 Steps How To Connect the Devices

Devices used in the test system example (

) are connected using the following steps. All

devices have to be switched off.

1. Inside the isolated EMC/ESD Test Environment:

Connect the device under test (DUT) to the MOST150 E-O Converter #2 with two coaxial cables
(front panel). Use the converter cables Fakra to SMA to connect the coaxial cable to the MOST150
E-O Converter. The MOST150 E-O Converter #2 is running on battery power.

2. Pass between isolated EMC/ESD Test Environment and test area outside:

Connect the duplex optical fiber cable to each of the MOST150 E-O Converters (Interconnect on
the rear panel), ensuring that the LC connectors are inserted correctly.

3. Outside the isolated EMC/ESD Test Environment:

Connect the customer MOST network devices to the MOST150 E-O Converter #1 using two coaxial
cables (front panel). Use the converter cables Fakra to SMA to connect the coaxial cable to the
MOST150 E-O Converter. The MOST150 E-O Converter #1 is running with power supply.

4. Turn on all of the devices. The MOST network and Interconnect LEDs on the MOST150 E-O

Converters will turn off once the network is locked.

5. The system is now ready for testing.

2.2 Test Report

The following tests have been performed for the MOST150 E-O Converter:



Radiated Emissions (RE)



Bulk Current Injection (BCI)



Electro-Static Discharge (ESD)

Contact

[email protected]

if you are interested in getting the test reports.

«
...
9
10
11
12
13
...
»

Содержание MOST150

























Отзывы:

Нет отзывов