K2L MOST150 Скачать руководство пользователя страница 1 | Manualshive

Страница: 1 / 24

K2L MOST150 Скачать руководство пользователя страница 1

ISBN: 978-1-5224-1852-8

Copyright © 2015 - 2017 K2L GmbH & Co. KG ("K2L"). All rights reserved.

Please make sure that all information within a document marked as 'Confidential' or 'Restricted Access' is handled solely in accordance with the agreement pursuant to which
it is provided, and is not reproduced or disclosed to others without the prior written consent of K2L. The confidential ranking of a document can be found in the footer of every
page. This document supersedes and replaces all information previously supplied. The technical information in this document loses its validity with the next edition. Although
the information is believed to be accurate, no responsibility is assumed for inaccuracies. Specifications and other documents mentioned in this document are subject to change
without notice. K2L reserves the right to make changes to this document and to the products at any time without notice. Neither the provision of this information nor the sale
of the described products conveys any licenses under any patent rights or other intellectual property rights of K2L or others. The products may contain design defects or errors
known as anomalies, including but not necessarily limited to any which may be identified in this document, which may cause the product to deviate from published descriptions.
Anomalies are described in errata sheets available upon request. K2L products are not designed, intended, authorized or warranted for use in any life support or other
application where product failure could cause or contribute to personal injury or severe property damage. Any and all such uses without prior written approval of an officer of
K2L will be fully at your own risk. The K2L logo is a trademark of K2L. Other names mentioned may be trademarks of their respective holders.

K2L disclaims and excludes any and all warranties, including without limitation any and all implied warranties of merchantability, fitness for a particular purpose, title, and
against infringement and the like, and any and all warranties arising from any course of dealing or usage of trade. In no event shall K2L be liable for any direct, incidental,
indirect, special, punitive, or consequential damages; or for lost data, profits, savings or revenues of any kind; regardless of the form of action, whether based on contract;
tort; negligence of K2L or others; strict liability; breach of warranty; or otherwise; whether or not any remedy of buyer is held to have failed of its essential purpose, and whether
or not K2L has been advised of the possibility of such damages.

© 2015 - 2017 K2L GmbH & Co. KG

DS60001342C

K2L - USER’S GUIDE

MOST150 E-O Converter - Simplex Variant

*X13611*

1
2
3
...
»

Содержание MOST150

























Отзывы:

Нет отзывов