K-Touch Tianyu A996, Руководство пользователя

Страница: 32 / 33

English characters inputting steps:
„
Every key is set to input multi characters. Fast repeatedly press the key until the
character you want appears. Wait for the cursor to move and then input the next
character.
„
Press # to switch inputting method.
„
Press right key to delete wrong input.
3.5 Handwriting
„
Smart Pinyin: write in the touchpad and then there will be 9 choices for you to select what
you want.
„
English: write English letter in the touchpad to input English.
„
Number: write number in the touchpad to input number.
„
Symbol: there are some symbols in the screen bottom and it can be selected directly.
4
SAR value
The SAR value information is as follow:
DUT: Dipole 835MHZ; Type: 835V2; Serial: 835V2-SN: 443
SAR(1g)=1.02mW/g; SAR(10g)=0.724mW/g
Maximum value of SAR(measured)=1.07mW/g
DUT: Dipole 1900MHZ; Type: 1900V2; Serial: 1900-SN: 541
SAR(1g)=0.305mW/g; SAR(10g)=0.153mW/g
Maximum value of SAR(measured)=0.315mW/g
5
RADIO WAVES
THIS CELLPHONE MEETS THE GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO
RADIO
WAVES.
Your cellphone is a radio transmitter and receiver. It is designed and manufactured not to exceed
the emission limits for exposure to radio-frequency (RF) energy. These limits are part of
comprehensive guidelines and establish permitted levels of RF energy for the general population.
The guidelines are based on standards that were developed by independent scientific organizations
through periodic and thorough evaluation of scientific studies.These guidelines include a
substantial
safety margin designed to ensure the safety of all persons, regardless of age and health.
The exposure standard for cellphones employs a unit of measurement known as the Specific
Absorption Rate, or SAR. The SAR limit set by public authorities such as the Federal
Communications Commission of the US Government (FCC), or by Industry Canada, is 1.6 W/kg
averaged over 1 gram of body tissue. Tests for SAR are conducted using standard operating
positions with the cellphone transmitting at its highest certified power level in all tested frequency
bands.
Although the SAR is determined at the highest certified power level, the actual SAR level of the
cellphone while operating can be well below the maximum value. This is because the cellphone is
designed to operate at multiple power levels so as to use only the power required to reach the
network. In general, the closer you are to a wireless base station antenna, the lower the power