background image

KTI63201 / KTI63207 

07/12/14

PREVENTATIVE MAINTENANCE

    

This is the safety alert symbol used for the PREVENTATIVE MAINTENANCE section of this manual to alert you to potential 

 

 

  personal injury hazards. Obey all instructions to avoid possible injury or death.

    

IMPORTANT: 

Any jack found to be defective as a result of worn parts due to lack of lubrication, or hydraulic system 

 

 

  contaminated with water, rust and/or foreign materials is not eligible for warranty consideration.

1.  Always store the jack in a well protected area where it will not be exposed to inclement weather, corrosive vapors, abrasive dust, or  

 

any other harmful elements. The jack must be cleaned of water, snow, sand, grit, oil, grease or other foreign matter before using.

2.  The jack must be lubricated periodically in order to prevent premature wearing of parts. A general purpose grease must be applied to  

 

the threads on the extension screw. Do not lubricate any portion of the lift saddle and make sure the saddle is free from grease, any  

 

kind of lubricant, or debris before using the jack.

3.  It should not be necessary to refill or top off the reservoir with hydraulic fluid unless there is an external leak. An external leak requires  

 

immediate repair which must be performed in a dirt-free environment by qualified hydraulic repair personnel who are familiar with this  

 

equipment. Authorized Service Centers are recommended. IMPORTANT: In order to prevent seal damage and jack failure, never use 

 

alcohol, hydraulic brake fluid, or transmission oil in the jack. Use hydraulic jack oil.

4.  Every jack owner is responsible for keeping the jack label clean and readable. Use a mild soap solution to wash external surfaces of  

 

the jack but not any moving hydraulic components.

5.  Do not attempt to make any hydraulic repairs unless you are a qualified hydraulic repair person that is familiar with this equipment.

TROUBLESHOOTING

PROBLEM: UNIT WILL NOT LIFT RATED LOAD.
ACTION:

 

Purge air from hydraulic system by following procedure under SETUP.

PROBLEM: UNIT WILL NOT SUSTAIN RATED LOAD OR FEELS "SPONGY" UNDER RATED LOAD.
ACTION:

 Purge air from hydraulic system as above.

 

PROBLEM: UNIT WILL NOT LIFT TO FULL HEIGHT.
ACTION:

 

Purge air from hydraulic system as above or check oil level in reservoir.

PROBLEM: UNIT STILL DOES NOT OPERATE.
ACTION:

 

Contact your place of purchase for details on handling warranty.

K-Tool International 1 Year Limited Warranty 

K-Tool International Lifting Equipment is warranted to be free from defects in material and workmanship within one year from the date of 
original purpose.  This warranty is extended to the original retail purchaser only.  If any jack or service-related item proves to be defective 
during this period, it will be replaced or repaired, at K-Tool International’s option, without charge.  This warranty does not apply to 
damage from accident, overload, misuse or abuse, nor does it apply to any equipment which has been altered or used with special 
attachments other than those recommended.  This warranty does not cover repairs made by anyone who is not a K-Tool International 
Professional Lifting Equipment Authorized Repair Center.

All Standard Duty jacks or service-related equipment will be replaced or repaired at K-Tool International’s option during the 1 year 
warranty period. During the 1 year warranty period, all alleged defective products and/or parts must be shipped, freight prepaid, along 
with proof of date-of-purchase, to your nearest K-Tool International Professional Lifting Equipment Authorized Warranty Center.  Be 
certain to include your name, address and phone number along with proof-of-purchase information, and a brief description of the alleged 
defect.  The product will be returned to the customer, freight prepaid.

Many alleged defectives may simply be handled by calling your nearest Service Center for parts.  See pages 16-18 for a listing of 
authorized warranty service centers.

In no event shall K-Tool International be liable for incidental or consequential damages.  The liability on any claim for loss or damage 
arising out of the sale, resale or use of a jack or related service equipment, shall in no event exceed the purchase price.  SOME STATES 
DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION 
MAY NOT APPLY TO YOU.

THIS WARRANTY IS THE SOLE AND EXCLUSIVE WARRANTY PROVIDED IN CONNECTION WITH THE SALE OF K-TOOL 
INTERNATIONAL PROFESSIONAL LIFTING EQUIPMENT.  ALL OTHER WARRANTIES, INCLUDING ANY IMPLIED WARRANTIES OF 
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXCLUDED. THIS WARRANTY GIVES YOU SPECIFIC LEGAL 
RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.

 

WARRANTy HANDLING PROCEDURES & GUIDELINES KTI STANDARD DUTy SERIES 

Содержание KTI63201



















Отзывы: