EN
6
7
Maintenance
• Remove the fan impeller if it is very dirty.
• Wipe all plastic parts with a soft cloth dampened with a soap solution
Malfunction
Probable cause
Remedy
When connected to the
power grid, the fan does not
rotate, does not respond to
controls.
The mains supply is not connected.
It is necessary to consult a specialist.
Internal connection fault.
Low air flow.
The ventilation system is clogged.
Clean the ventilation system.
Increased noise or vibration.
The impeller is blocked.
Clean the impeller.
The fan is not fixed or incorrectly mounted.
Correct the installation error.
The ventilation system is clogged.
Clean the ventilation system.
Possible problems and solutions
ATTENTION!
The fan and the service controlling equipment has to be isolated from power supply during the installation
time and service.
Pic.4 STANDARD
Pic.5 STANDARD-02
Storage and transportation
Keep the fan only in the packaging of the manufacturer in a ventilated room at a temperature of +5 ° C to +40 ° C and relative
humidity of 80% (at T = 25 ° C). Keeping time - 5 years from date of manufacture. Products transported by any transport
provided consumer protection or transport container from the direct effects of rainfall, lack of bias transport places during
transport, the lack of mutual physical impact during transportation and preservation of fans. Transportation is carried out in
force with the rules for this transport.
This marking indicates that this product should not be disposed with other household wastes throughout the EU. To
prevent possible harm to the environment or human health
from uncontrolled waste disposal, recycle it responsibly to
promote the sustainable reuse of material resources. To return
your used device, please use the return and collection
systems or contact the retailer where the product was purchased. They
can take this product for environmental safe recycling.
Disposal