INSTALL MOUNTING BRACKETS
1.
After eveluating the height of the hood, place the hook
center over installation location.
Drill 3 holes of
Ø
8mm
on a suitable place to fix the mounting brackets.
2.
Put the drywall anchors into the holes and fix the
mounting screws (4x50mm) into the anchors, and install
the hook on the wall as shown.
INSTALL SLIDERY DUCT
FIXING SUPPORT
1. Calculate the final height of the U-shaped section, drill
2 holes of
Ø
8mm on a suitable place in line with the
slidery duct fixing support.
2. Put the drywall anchors into the holes and fix the
mounting screws (4x50mm) into the anchors, and
install the hook on the wall as shown. (The rest two
pares of 4x50mm screw and drywall anchors are for
spare)
